STATIMAT CU
Automatic Tensile Tester
|
Based on the ME model,
STATIMAT CU is an
economically priced automatic tensile tester, which offers the
optimum solution for many application areas for both
yarn-producing and -processing industries.
Special characteristics of the STATIMAT
CU model are a force measuring range of 100 N, an
innovative PC based control technique, a somewhat reduced yarn
delivery speed into the test section compared to the ME model,
together with a package changer for up to 30 yarn packages. The
STATIMAT CU cannot be
equipped with a nip-roller feed and
AUTOCOUNT.
|
System components
|
|
Test section: |
| |
2 pneumatic yarn
clamps, automatic linear threading, min. gauge length 50 mm,
max. travel of draw-off clamp 860 mm for a 100 mm gauge length,
draw-off clamp speed 1 - 5000 mm/min.
|
|
Package changer: |
| |
Standard version with
10 positions, expandable to 30 positions.
|
|
Measuring systems: |
| |
Carrier frequency
bridge with 100N DMS-load cell.
Other ranges as options.
Elongation measuring device with resolver, resolution 2 µm.
|
|
TESTCONTROL: |
| |
PC system for
controlling the test processes and for the evaluation of the
measured data, connected via
TEXTECHNO USB interface;
Textechno software as a WINDOWS application;
Input of all parameters for testing and measured data
evaluation, saving of selected parameter sets under code words;
PC easily integrated into any network type.
|
Further
technical data
|
|
Mains supply: |
| |
230 V, 50 (60) Hz,
current requirement approx. 1 A.
|
|
Compressed air supply: |
| |
5
bar, 100 l/min.
|
|
Dimensions, weight
: |
| |
Height 1730 mm, width 885 mm (with package changer for 10
units),
depth 700 mm , approx. 200 kg.
|
The above technical
contents can be subject to changes by
TEXTECHNO.
|
|
|
Measured Solutions, Inc.
